(as of Nov 27,2022 13:28:06 UTC – Details)
See the different with the orignal parts.
Perfect replacement for bracket
We changed the design of the orignal bracket ,the o-ring has made more thicker than before and will never break again ,
Get longer bungee cord for free
For this situation ,the ball may come out ,and the bungee cords seems a little short ,so we make the square one more thicker and more higher at the ball stay place ,also add 2 pcs 50mm bungee cords in the package ,in case you will face different place.
Replace broken end cap
Change to our thicker end cap, the cen caps with bigger and thicker ears will perfect fit the orignal rod with 18mm holes.
This bracket can be installed on the roof or the wall, adjust the angle of the plate buy the bolts insaid the plate cover,do lifting installation or side wall installation as you need. Change to a left-hand clutch control also use this way.
Suitable for the clutch axis of the 7x11mm ellipse and the other side idle end axis of the 6mm circle. If your original beam shaft doesn’t fit, you can buy our 28mm or 38mm plugs to install your curtains.
If the radius of the cylinder formed by the roll-up of your curtains is less than 45mm, then this product can be used.
Universal Using for all Cranked Operated (crank wand OD less than 12mm)and Cord Pull Roller Sun Shades.Metal Rolling structure ,durable .
Parts Included: Screws and anchor,high indensity stainless steel screws and plastic anchors.